Kalos

All veneered particleboard, melamine-faced and MDF components
are manufactured using E1 rated materials in compliance
with the UNI EN 312 and UNI EN 622-01 standards regarding
accepted formaldehyde emission levels. All metal components
are treated with epoxy powder finishes.

DESKS AND TYPING TABLES
Desktops are 30 mm thick and made from veneered particleboard
with a 1.5 mm thick wood edging and finished with a scratch-proof
polyurethane finish. Tops are also available in 10 mm toughened glass,
with the lower part screen printed. Glass tops are fastened to the frame
by means of 5 flanges of polished stainless steel. The frame consists
of a central steel tube (40 mm Ø), with an aluminium colour finish,
which is connected to 4 triangular extruded aluminium legs finished
with a textured finish. The structure has a front modesty panel in painted
perforated sheet metal with a thickness of 2mm that has both an aesthetic
and a structural function. The suspended rotating computer shelf is oval
160 x 80 cm in 30mm thick MDF with 45° edges and an textured lacquer finish.
Rotation is made possible by means of a specific connection to the desk leg
and by 4 cylindrical spacers that allow the top to be supported by a drawer unit.
Desk extension units can be fitted to the long side of the desks to a maximum
depth of 25cm. These MDF elements are 30 mm thick and have a textured
lacquer finish. They are fitted to the desks with metal plates.

DRAWER UNITS
The MDF drawer units have a highly scratch-proof textured polyurethane finish
and are fitted with a cylinder lock for the simultaneous locking of all drawers.
All units are fitted with castors. For filing units, hanging file supports are included
for use with folders of 33 cm and 39 cm. Drawers are made of sheet metal
and finished with epoxy coatings. Drawers open on concealed ball-bearing slides
and have a ‘quick fit’ mechanism The slides are galvanized against corrosion
and are available in two versions: single for loads up to 40 kg or double
(for filing drawers) for up to 60 kg. The pen tray is plastic. The metal handles
have a satin aluminium finish.

CABINETS
The structure and back are formed from melamine-coated panels
(19 mm and 10 mm thick respectively). Shelves are melamine-coated,
but are also available on request in epoxy powder coated metal, and have
special concealed supports to prevent distortion when loaded. The distance
between shelves can be adjusted every 32 mm. Doors are made of 19 mm thick
veneer-finished and -edged particleboard. A scratchproof polyurethane varnish
is used. Toughened glass doors are 5 mm thick. All cabinets are supplied
with adjustable feet and a metallic plinth treated with epoxy powder varnish.
MDF tops and sides are available on request with the front edges shaped
to 45° and the same finish as the doors. Metal handles have a satin aluminium
finish.All cabinets are fitted with rust-proof hinges. Their quick positioning
with stop device and safety catches to prevent the doors from dropping also
allows for the correct positioning of the door itself. Furthermore, the hinges
allow the doors to be independently adjusted in three directions to guarantee
perfect alignment. The doors, with the exception of those in glass, are fitted
with a cylinder lock with connecting rod which locks the upper section.

MEETING TABLES
Table tops have the same finish as desks and are 36 mm thick with edges
shaped at a 45° angle. Tables have a coated aluminium base.