Eureka / Storage and integrated walls

The storage walls are made of panels with a length
of 500 or 1000 mm of the pitch between each vertical element,
height of 1140, 2176, 2720 or 3264 mm and a depth
of 430 mm.

Sides
The sides are made of 25 mm-thick, class E1 melamine
chipboard in a variety of light, neutral colours (in compliance
with current UNI/DIN Standards on formaldehyde emissions)
with 5 mm holes every 32 mm for the swivel pins used
for fastening of doors, backs, base and upper and lateral strips.
The vertical edges are trimmed with 1 mm-thick ABS with
rounded edges and the horizontal edges are trimmed with
0.5 mm-thick ABS. Levelling feet are inserted in the base
to adjust for level variations of up to +/- 20 mm, which may
also be adjusted in the wall.

Horizontal elements
The horizontal elements, are made from 25 mm-thick
chipboard, and are available in the same finish as the sides.
They are used to space and join the sides and determine
the length of the modules. They are fastened to the vertical
elements by means of two eccentric pins for each panel.
The horizontal elements are trimmed with 1.5 mm-thick
ABS with rounded edges on the long sides and with 0.5
mm-thick ABS on the short sides.

Backs
The backs are made of 18 mm-thick, E1 class melamine
chipboard, in a walnut, cream-white or bleached oak-wood
finish. The borders are trimmed on the vertical
sides with 1 mm-thick ABS with rounded edges and
on the horizontal sides with 0.5 mm-thick ABS.
They come in standard sizes and can be inserted independently
to seal the back of the module.

Shutter doors
The shutter doors are made of 18 mm-thick E1 class melamine
chipboard in a walnut, cream-white or bleached oak-wood
finish. The borders are trimmed on the vertical sides with
2 mm-thick ABS with rounded edges and with 0.5 mm-thick
ABS on the horizontal sides.They are fastened to the structure
by means of pressed steel, disappearing hinges with a full
opening of 110° degrees or, upon request, of 180° degrees.
They are supplied with a knob for opening and closing or,
upon request, a lock with rotating bars with an external
knob. The left hand shutter is supplied with a co-extruded
PVC profile to allow for easier closing of the shutters.

Glass shutter doors
The glass shutter doors are made of 5 or 6 mm-thick
EU-grey or frosted glass and are fastened to the structure
by adjustable hinges made of pressed steel to allow
for an opening of 110°degrees.

ACCESSORIES

Shelves
Additional shelves are available upon request. The shelves
are made of 25 mm-thick melamine chipboard
or, as an alternative, forged steel sheet with fittings
for hanging folders.

Pull out frames for cabinets
Steel pull out frames can be supplied for the 1000 mm
module, with fully-extending telescopic slides.

Hanger rail
The steel pullout clothes hanger rail has enough space
for 5/7 hangers.

INTEGRATED WALLS

The integrated walls are made of panels with a length
of 500 or 1000 mm of the pitch between each
vertical element. The height can be of 1140 or 2176 mm
and the depth 512 mm.

The mixed walls are made up of standard modules
of partition walls and with elements of storage walls with
no backs to create cabinet units.